BlastIQ™ Insights - Items by Hole

Detailed information:

1. Blast Name Selector

   

   • Select a blast from the drop-down list.
   • Start typing to search for a specific blast.

2. Total Number of Holes

   

   • Displays the total number of holes in the selected blast plan.

3. Legend

   

   • Legend content updates based on the selected State and Type:
     • Type
       • Design
       • Actual
       • Comparison
     • State
       • Initiators
       • Boosters
       • Accessories

4. Back to Site Map

   

   • Click the "Back to Site Map" to return to the Site Map page.

5. View

   

   • Map View
     • Navigate to the view selector.
     • Select "Map View".
     • Blast plan view displays an area per hole coloured according to the state selector selected.
     • Mouse over the holes to get more information
   • Table View
     • Click the table view and displays:
       • Product, Item type, who added the item, date added and comments

6. State Selector

   

   • Controls which data is displayed on the map and how holes are coloured.
     • Design
       • Shows the planned number of boosters or initiators for each hole.
     • Actual
       • Shows the actual number of boosters or initiators that were loaded into each hole.
     • Comparison
       • Shows the difference between Design and Actual so user can quickly spot mismatches.
         • Completed - design matches actual
         • Additional - More items loaded than planned
         • Incomplete - Fewer items loaded than planned
         • Planned - Design has items but Actual is still zero
         • No data - No design or actual values available

7. Type Selector

   

   • Controls which item type is displayed on the map and how holes are coloured.
     • Initiators
     • Boosters
     • Accessories
       • When accessories is selected the type selector will be disabled.

8. Summary

   

   • Click > then view both Design and Actual counts for initiators and boosters.

9. Hole Details Panel

   

   • Click on a hole on the map.
   • The hole details panel opens.
   • Clicking the Hole Details icon without clicking a hole by default shows no data.
   • The hole details panel closes only when the user clicks the "x" button.
   • The panel consists of five tabs: Details, Decks, Measurements, Drill Data, and Comments.
     • Details
       • By default, the "Details" will be visible, presenting users with design, drilled, and measured data.
     • Decks
       • Decks and relevant properties are grouped by design, adjusted and actual.
       • Deck is displayed by a lower number from the bottom to the top (higher number).
     • Measurements
       • Provides a concise overview of recorded data, including the time occurrence, associated deck, property details, recorded values, user identity, and the equipment or device used.
       • Measurements are ordered by timestamp.
       • Sorting is implemented by clicking on the column headers.
     • Drill Data
       • Provides a concise summary of drilling-related information.  Users will find details such as the average penetration rate, start time, end time, drill name, operator, and timestamps for when the event occurred and was received.
     • Comments
       • Hole comments recorded in BlastIQ™ Mobile v1.22.206 or older will not show in the comments in the hole details panel.  These comments are still available in the already supported display points and data export.

10. Measurements

    

    • Click the measurements icon located in the lower left-hand corner.
    • Click anywhere on the map to draw points.

    • Lines should automatically connect the points.

    • The aggregated distance of the drawn lines will be visible.

11.  Layers

    

    • Click on the layers icon.
    • Choose "Image Overlays" or "Polylines" from the available options.

    • Select "None"  for no layers display.

      To upload polylines and image overlays, please visit the Site Map article here and navigate to the Layer Administration section.

12. Display

    

    • Hole Names
      • Select "On" to display hole names on the map.
      • Select "Off" to hide hole names on the map.
    • Secondary Indicators
      • Select "None" does not highlight any holes.
      • Select "Comment" to highlight holes with added notes.
      • Select "Wet" to highlight holes in a wet state.
    • Background
      • The user can choose to change the map background to allow better visualisation of the blasts of interest from the following options:
        • Select "Satellite" to set a satellite image as your map background.
        • Select "Light" to give your map a white background.
        • Select "Dark" to give your map a dark background.