-
6.12.12
SHOTPlus™
Surface
Beta
November, 2022
- Version 6.12.12 of SHOTPlus™ Beta, first offered to users on Monday 28th November 2022.
- A notification will appear on start-up in SHOTPlus™ Beta once the update is available.
- For further information on updating the SHOTPlus™, please contact the BlastIQ™ Support Team via support.blastiq.com.
-
New
-
- Time Window calculation updated to include:
- Design - Charge weights and initiation times based on a hole's design state
- Updated Design (default) - Charge weights and initiation times based on a hole's updated design state.
- Actual and Design - Charge weights an initiation times based on Measured data where present, and Updated Design where not present.
- Actuals Only - Charge weights an initiation times based on Measured data only.
- When adjusting EBS intervals, intervals can now be adjusted at specific monitoring points.
- 'Custom' option added to Row View, allowing users to view selected holes as a row.
- BlastIQ™ Licences can now be activated from within SHOTPlus™.1
- 'Activate BlastIQ™ Licence' option added to the existing licence expiry warning.
Information
- To activate a BlastIQ™ Licence from within SHOTPlus™, select 'Help' > 'Activate BlastIQ™ Licence' from the main toolbar in SHOTPlus™.
- Time Window calculation updated to include:
-
Improved
-
- Vibration Monitor icon updated.
- Rendered surfaces in Heat Map mode can now be set to 0% transparency.
- Hole collars can now be visualised when clipped to rendered surfaces with 0% transparency.
- Surface connector icons updated where >6 ties are used.
- 'Loaded Not Measured' is now consumed from BlastIQ™.
- Displayed on hole diagrams, next to the deck horizon as a '?'
- Latitude and Longitude are now imported into SHOTPlus™ for WebGen™ imports.
- Where an initiation point has no booster, the 'Num' column now shows 0.
-
Fixed
-
- Vibration Monitors icons were being hidden by rendered surfaces with 0% transparency.
- The surface manager was not taking all selected points into account where creating registered surfaces.
- Rows were not showing in Row View when a baseline was not present.
- Backfill decks were not being applied correctly in certain situations.
- Extra holes, recorded in the field, included WebGen™ imports were not being positioned in the SHOTPlus™ plan correctly.
- EBS Flags were not being applied correctly to WebGen™ imports.
- Initiation times for WebGen™ blasts were being rounded incorrectly.
- Quantities by Hole Type summary was not showing IE/HE quantities.
- When importing data from Quarryman Pro face points were being incorrectly imported as polylines.
- Wet sides measurement of 0.1 m was not applying wet sides rules.
- Importing and IKN file was positioning initiators at the incorrect depth.
- DXF files were being imported with the incorrect layer colour referenced.
- Wet sides conditions were not being recognised where Graphical Charging Rules were used.
- Manually editing a loading design for a hole was not updating the Updated Design in all locations resulting in a mismatch in quantities.
- Hidden layers were not appearing in 'Layer' drop down boxes.