Exporting Dipping Data

After you have entered dipping data for some or all of the blastholes in a blast, you can export the results to SHOTPlus. This will include any new holes you have added to the blast.

First, close each screen you are on until you return to the following screen:



Export via the USB Link

To export the data directly to SHOTPlus over a USB connection, connect your device to the PC on which SHOTPlus is running, make sure that the correct blast design is open in SHOTPlus and then tap EXPORT.


Export via BML Files

To export the data via a BML file, either tap the green tick to close the blast or choose Menu / File / Save Blast. This saves the blast data to a file on the device. 

Connect your device to your PC and use Windows Explorer to copy the BML file onto your PC. Under Windows 7, the device appears under Computer / Portable Devices.

To import the file into SHOTPlus, open the correct .spf file, choose File / Import / Blast Markup Language File and navigate to the file you copied off your device.


Viewing the Exported Data in SHOTPlus

Click the Hole Table button to view the dipping data in tabular form. To see all measured values of a hole property, simply click the down arrow in the table cell.


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request